Omron FQM1-MMA21, FQM1-CM001, FQM1-MMP21 operation manual Appendix C, A626

System Setup, Auxiliary Area Allocations, and Built-in I/O Allocations					Appendix C
Address	Bits	Name		Function		Controlled
						by
A626	00	Pulse Output 1	PV Reset Bit	OFF: Pulse output 1 PV not reset.		User
		Command Bits		ON: Resets pulse output 1 PV.
	01		Range Com-	OFF: Does not clear the execution results (A630) or output bit pat-
			parison Results	tern (A631) from CTBL(882) execution for range comparison for
			Clear Bit	the pulse output PV.
				ON: Clears the execution results (A630) or output bit pattern
				(A631) from CTBL(882) execution for range comparison for the
				pulse output PV.
	02 to 15		Reserved	---
A627	00	Pulse Output 2	PV Reset Bit	Same as for Pulse Output 1 Command Bits.
		Command Bits
	01		Range Com-
			parison Results
			Clear Bit
	02 to 15		Reserved
A628	00 to 06	Pulse Output	Reserved	---
		Control Bits
	07		Speed Change	OFF: Sets the speed change cycle to 2 ms during pulse output for
		(Apply to both
			Cycle Bit	ACC(888) or PLS2(887).
		pulse outputs 1
		and 2.)		ON: Sets the speed change cycle to 1 ms during pulse output for
				ACC(888) or PLS2(887).
	08 to 13		Reserved	---
	14		PLS2 Pulse	OFF: Sets Direction Priority Mode.
			Output Direc-	In Direction Priority Mode, pulses are output only when the pulse
			tion Priority	output direction and the direction of the specified absolute position
			Mode Bit	are the same.
				ON: Sets Absolute Position Priority Mode.
				In Absolute Position Priority Mode, pulses are always output in the
				direction of the specified absolute position.
	15		Reserved	---
A629	00 to 15	Reserved	---	---		---
A630	00 to 15	Pulse Output 1	Range Com-	Contains the CTBL(882) execution results for range comparison.		Module
		Monitor Data	parison Results	Bits 00 to 15 correspond to ranges 1 to 16.
				OFF: No match
				ON: Match
A631	00 to 15		Output Bit Pat-	Contains the output bit pattern when a match is found for
			tern	CTBL(882) execution results for range comparison
				Note If more than one match is found, an OR of the output bit pat-
				terns with matches will be stored here.
A632	00 to 15	Pulse Output 2	Range Com-	Same as for Pulse Output 1 Monitor Data.
		Monitor Data	parison Results
A633	00 to 15		Output Bit Pat-
			tern

335