Omron FQM1-CM001, FQM1-MMA21, FQM1-MMP21 operation manual Analog Input Functions, Section, A562

Analog Input Functions						Section 7-9
Word	Bits		Function			Settings	Controlled
							by
A562	00	Analog Out-		User Adjustment	Initial value is 0.		Motion
		put 1 Flags		Completed	Set to 1 if user performs offset/gain adjustment and		Control
					Returns to factory default setting of 0 if adjustment		Module
					value is cleared.
	01 to 03			Reserved			---
	04			Operating	ON:	ON while the analog output is being changed	Motion
						by ACC(888).	Control
					OFF: Turned OFF when target value is reached.		Module
	05 to 07			Reserved			---
	08			Output SV Error	ON:	ON when the output SV setting is outside of	Motion
						the allowed setting range.	Control
					OFF: OFF when the output SV is within range.		Module
					Note Only in End refresh mode
	09 to 11			Reserved			---
	12			Factory Adjust-	ON:	ON when the factory-set data stored in flash	Motion
				ment Value Error		memory is invalid.	Control
					OFF: OFF when the factory-set data stored in		Module
						flash memory is normal.
	13			Reserved			---
	14			User Adjustment	ON:	ON when the user-set adjustment value	Motion
				Value Error		stored in flash memory is invalid.	Control
					OFF: OFF when the user-set adjustment value		Module
						stored in flash memory is normal.
	15			Reserved			---
A563	00	Analog Out-		User Adjustment	These flags have the same functions as the Analog		Motion
		put 2 Flags		Completed	Output 1 Flags, above.		Control
							Module
	01 to 03			Reserved
	04			Operating
	05 to 07			Reserved
	08			Output SV Error
	09 to 11			Reserved
	12			Factory Adjust-
				ment Value Error
	13			Reserved
	14			User Adjustment
				Value Error
	15			Reserved

220