Omron FQM1-MMP21, FQM1-CM001 General Specifications, Section, Power Supply Unit Specifications

General Specifications Section 2-2

Note (1) Disconnect the Power Supply Unit's LG terminal from the GR terminal when testing insulation and dielectric strength. Testing the insulation and dielectric strength with the LG and GR terminals connected will damage internal circuits.

(2)Do not apply more than 600 V when testing the dielectric strength of an- alog I/O terminals. Applying more than 600 V may damage the internal elements.

Power Supply Unit Specifications

Item	Specifications
Power Supply Unit	CJ1W-PA205R	CJ1W-PA202
Supply voltage	100 to 240 V AC (wide-range), 50/60 Hz
Operating voltage	85 to 264 V AC, 47 to 63 Hz
and frequency
ranges
Power consumption	100 VA max.	50 VA max.
Inrush current	At 100 to 120 V AC:	At 100 to 120 V AC:
(See note 1.)	15 A/8 ms max. for cold start at room temperature	20 A/8 ms max. for cold start at room temperature
	At 200 to 240 V AC:	At 200 to 240 V AC:
	30 A/8 ms max. for cold start at room temperature	40 A/8 ms max. for cold start at room temperature
Output capacity	5.0 A, 5 VDC (including supply to Modules)	2.8 A, 5 VDC (including supply to Modules)
	0.8 A, 24 VDC	0.4 A, 24 VDC
	Total 25 W max.	Total 14 W max.
Output terminal	Not provided.
RUN output	Contact configuration: SPST-NO	Not provided.
	Switching capacity:
	250 V AC, 2 A (resistive load)
	120 V AC, 0.5 A (inductive load)
	24 VDC, 2 A (resistive load)
	24 VDC, 2 A (inductive load)
Insulation resis-	20 MΩ min. (at 500 VDC) between AC external and GR terminals (See note 2.)
tance
Dielectric strength	2,300 V AC 50/60 Hz for 1 min between AC external and GR terminals (See note 2.)
	Leakage current: 10 mA max.
	1,000 V AC 50/60 Hz for 1 min between DC external and GR terminals (See note 1.)
	Leakage current: 10 mA max.
Noise immunity	2 kV on power supply line (conforming to IEC61000-4-4)
Vibration resistance	10 to 57 Hz, 0.075-mm amplitude, 57 to 150 Hz, acceleration: 9.8 m/s2 in X, Y, and Z directions for 80
	minutes total (Time coefficient: 8 minutes ⋅ coefficient factor 10 = total time 80 min.) (conforming to
	JIS C0040)
Shock resistance	147 m/s2 3 times each in X, Y, and Z directions (conforming to JIS C0041)
Ambient operating	0 to 55°C
temperature
Ambient operating	10% to 90% (with no condensation)
humidity
Atmosphere	Must be free from corrosive gases.
Ambient storage	−20 to 75°C
temperature
Grounding	Less than 100 Ω
Enclosure	Mounted in a panel.
Weight	5 kg. total max.
Dimensions	80 ⋅ 90 ⋅ 65 mm (W ⋅ H ⋅ D)	45 ⋅ 90 ⋅ 65 mm (W ⋅ H ⋅ D)
Safety measures	Conforms to cULus and EC Directives.

33