Issue 01/06 | Parameter Description |
3.39Free function blocks (FFB)
P2800 | Enable FFBs |
|
| Min: | 0 | |
| CStat: | CUT | Datatype: U16 | Unit: - | Def: | 0 |
| TECH | Active: first confirm | QuickComm.: No | Max: | 1 | |
Level
3
Free function blocks (FFB) are enabled in two steps.
1.Parameter P2800 enables all free function blocks , normally (P2800 = 1).
2.Parameters P2801 and P2802 respectively, enable each free function block individually (P2801[x] > 0
oder P2802[x] > 0).
Possible Settings:
0Disabled
1Enabled
Dependency:
All active function blocks will be calculated in every 132 ms.
P2801[17] Activate FFBs |
|
| Min: | 0 | |
CStat: | CUT | Datatype: U16 | Unit: - | Def: | 0 |
TECH | Active: first confirm | QuickComm.: No | Max: | 3 | |
Level
3
Free function blocks (FFB) are enabled in two steps.
1.Parameter P2800 enables all free function blocks , normally (P2800 = 1)
2.Parameters P2801 and P2802 respectively, enable each free function block individually (P2801[x] > 0 oder P2802[x] > 0)
In addition, Parameters P2801 and P2802 determine the chronological order of each function block. The following table shows that the priority increases from left to right and from bottom to top.
low 
Level 3
Level 2
Level 1
Inactive 0
Priority 2
high
Priority 1
CMP 2 | CMP 1 | DIV 2 | DIV 1 | MUL 2 | MUL 1 | SUB 2 | SUB 1 | ADD 2 | ADD 1 | Timer 4 | Timer 3 | Timer 2 | Timer 1 | NOT 3 | NOT 2 | NOT 1 | XOR 3 | XOR 2 | XOR 1 | OR 3 | OR 2 | OR 1 | AND 3 | AND 2 | AND 1 | |||||
P2802 [13] | P2802 [12] | P2802 [11] | P2802 [10] | P2802 [9] | P2802 [8] | P2802 [7] | P2802 [6] | P2802 [5] | P2802 [4] | P2802 [3] | P2802 [2] | P2802 [1] | P2802 [0] | P2801 [16] | P2801 [15] | P2801 [14] | P2801 [13] | P2801 [12] | P2801 [11] | P2801 [10] | P2801 [9] | P2801 [8] | P2801 [7] | P2801 [6] | P2801 [5] | P2801 [4] | P2801 [3] | P2801 [2] | P2801 [1] | P2801 [0] |
Possible Settings:
0Not Active
1Level 1
2Level 2
3Level 3
Index:
P2801[0] : Enable AND 1
P2801[1] : Enable AND 2
P2801[2] : Enable AND 3
P2801[3] : Enable OR 1
P2801[4] : Enable OR 2
P2801[5] : Enable OR 3
P2801[6] : Enable XOR 1
P2801[7] : Enable XOR 2
P2801[8] : Enable XOR 3
P2801[9] : Enable NOT 1
P2801[10] : Enable NOT 2
P2801[11] : Enable NOT 3
P2801[12] : Enable
P2801[13] : Enable
P2801[14] : Enable
P2801[15] : Enable
P2801[16] : Enable
Example:
P2801[3] = 2, P2801[4] = 2, P2802[3] = 3, P2802[4] = 2
FFBs will be calculated in following order:
P2802[3], P2801[3] , P2801[4], P2802[4]
Dependency:
-Set P2800 to 1 to enable function blocks.
-All active function blocks will be calculated in every 132 ms.
low
MICROMASTER 440 | Parameter List |
241 |
