Omron CQM1H-SCB41 operation manual Specifications, Section

Using 1:1 Data Links			Section 7-2
7-1-2 Specifications
	Item	Specification
	Connection	Connection of 2 PCs through their RS-232C ports (prepared
	method	cable).
		Note RS-422A/485 ports can also be connected if a 4-wire con-
		nection method is used.
	Applicable PCs	CQM1H, CQM1, CPM1, CPM1A, CPM2A, CPM2C, or
		SRM1(-V2), C200HX/HG/HE, C200HS
		There are restrictions in the number of words that can be
		linked for some PCs.
	Number of nodes	2
	linked
	Number of words	64 words, LR 00 to LR 63	32 words sent per node
	linked
		32 words, LR 00 to LR 31	16 words sent per node
		16 words, LR 00 to LR 15	8 words sent per node
	Linked words	One of three groups listed above
	Link word setting	PC Setup in master PC
	Order of allocation	Words allocated to master PC first and then to slave PC.
	Startup method	Automatic startup after turning ON power to master and slave
		PCs.
	Status flags	None

7-2 Application Procedure

1, 2, 3... 1. Turn OFF the power supply to the PC.

2.Mount the Board.

3.Connections

Connect the external devices using RS-232C or RS-422 cables. The TERM and WIRE switches on the front panel of the Board must be set if the Board is connected using the RS-422A/485 port.

The CPU Unit can be connected to a Programming Console, the CX-Pro- grammer, or the CX-Protocol as required.

4.Turn ON power.

5.Set the PC Setup settings for the Serial Communications Board.

Use a Programming Console, the CX-Programmer, or the CX-Protocol to set the settings in the PC Setup between DM 6550 and DM 6559.

Note The settings stored in these words are read constantly; the PC does not need to be restarted or reset when changes are made to the set- tings. They will be updated automatically as soon as they are changed.

The following table shows the master PC settings for a 1:1 Data Link for LR 00 to

LR 63.

109