Omron CQM1H-SCB41 operation manual 372

V600/V620 ID Controller Protocol		Appendix M
	DIP Switch 2

1 2 3 4 5 6 7 8

Not used (Always keep it OFF.)

Communications protocol setting with host devices

1-to-N protocol

1-to-1 protocol

Note When selecting the “1-to-N” protocol, setting is limited to

N=1. In this case, the FCS check code may be added.

•ID Controller Unit Number Setting (Valid Only for 1-to-N Protocol)

Unit No.

No. 0

No. 1

No. 2

No. 3

No. 4

No. 5

No. 6

No. 7

Note 1. Be careful not to set to the same unit number twice. 2. Set them to OFF for the 1-to-1 protocol.

Synchronous condition

OFF (LL level)

ON (HL level)

Trailing edge

Leading edge

372