Omron CQM1H-SCB41 operation manual Measurement Condition Release 4000-series Sequence No

3Z4L Laser Micrometer Protocol Appendix K

Measurement Condition Release (4000-series) (Sequence No. 432)

This sequence clears the measurement conditions that have been set.

Send Data Word Allocation (2nd Operand of PMCR)

The send data word allocation is similar to that of sequence No. 431 (Measurement Condition Setting). However, only the setting Yes/No flags at +19 to +24 from the send data leading word can be used.

Receive Data Word Allocation (3rd Operand of PMCR)

None.

Note 1. The following conditions are used when the measurement conditions are released: Segment becomes 1 and the measurement interval becomes 1.

2.The following settings cannot be cleared separately using this sequence. They all must be cleared at the same time.

Lower limit, Upper limit

Data output conditions, Scheduled print timer

The scale (SCL) and data output timer (PRT) cannot be cleared.

3.This sequence can be used for the 3Z4L-4000 Series only when pin 8 on DIP switch SW2 is turned ON.

Measurement Condition List Request (4000-series) (Sequence No. 433)

This sequence requests the measurement condition settings that have been set and other settings.

Send Data Word Allocation (2nd Operand of PMCR)

None.

Receive Data Word Allocation (3rd Operand of PMCR)

Receive data storage words

+0	Number of receive data words
+1	(Undefined)				Segment number (SG)
+2	(Undefined)				Measurement interval number (M)
+3		Decimal portion			Lower limit value (LL)
+4	(Undefined)		Integer portion
+5	Sign		(Undefined)
+6		Decimal portion			Upper limit value (LH)
+7	(Undefined)		Integer portion
+8	Sign		(Undefined)
+9		Decimal portion			Reference value (REF)
+10	(Undefined)		Integer portion
+11	Sign		(Undefined)
+12	(Undefined)				Analog output scale number (SCL)
+13					Forced zero number (ZERO+)
+14
+15			(Undefined)
+16	(Undefined)				Data output condition (PR)
+17	(Undefined)	Data output timer (BCD 3 digits)		(PRT)
+18	(Undefined)				Number of seconds for latch timer (RLT)

342