Omron CQM1H-SCB41 Appendix, Ladder Interface Settings, Send word Receive word Allocation

K3Tj Intelligent Signal Processor Protocol					Appendix I
	Sequence	Communications	Function	Ladder interface		Notes
	No.	sequence name
				Send word	Receive word
				allocation	allocation
	320	Read set value L (con-	Reads the set value L.	Yes	Yes	See
		tinuous units)				Note1
	321	Read set value LL (con-	Reads the set value LL.	Yes	Yes	See
		tinuous units)				Note1
	322	Read set value with	Reads set value of a bank which	Yes	Yes	See
		bank (by unit number)	is not in use (K3TR: HH to LL,			Note2
			K3TC: O1 to O5).
	323	Read set value HH with	Reads the set value HH of a bank	Yes	Yes	See
		bank (continuous units)	which is not in use.			Note1
	324	Read set value H with	Reads the set value H of a bank	Yes	Yes	See
		bank (continuous units)	which is not in use.			Note1
	325	Read set value L with	Reads the set value L of a bank	Yes	Yes	See
		bank (continuous units)	which is not in use.			Note1
	326	Read set value LL with	Reads the set value LL of a bank	Yes	Yes	See
		bank (continuous units)	which is not in use.			Note1
	327	Read set value O5 with	Reads the set value O5 of a bank	Yes	Yes	See
		bank (continuous units)	which is not in use.			Note1
	328	Read set value O4 with	Reads the set value O4 of a bank	Yes	Yes	See
		bank (continuous units)	which is not in use.			Note1
	329	Read set value O3 with	Reads the set value O3 of a bank	Yes	Yes	See
		bank (continuous units)	which is not in use.			Note1
	330	Read set value O2 with	Reads the set value O2 of a bank	Yes	Yes	See
		bank (continuous units)	which is not in use.			Note1
	331	Read set value O1 with	Reads the set value O1 of a bank	Yes	Yes	See
		bank (continuous units)	which is not in use.			Note1
	332	Read holding data (by	Reads the peak/bottom data	Yes	Yes	See
		unit number)	(maximum, minimum).			Note3
	333	Read holding data PH	Reads the peak data (maximum).	Yes	Yes	See
		(continuous units)				Note3
	334	Read holding data BH	Reads the bottom data (mini-	Yes	Yes	See
		(continuous units)	mum).			Note3
	335	Read display value (PV)	Reads the display value (PV).	Yes	Yes
		(by unit number)
	336	Read display value (PV )	Reads the display value (PV).	Yes	Yes
		(continuous units)
	337	Read model (by unit	Reads the model data.	Yes	Yes
		number)
	338	Read model (continuous	Reads the model data.	Yes	Yes
		units)
	339	General-purpose com-	Send specified data or receives	Yes	Yes
		mand	specified data and writes it to the
			receive data words.

Note 1. Special specifications are required to use communications + comparison output.

2.Special specifications are required to use communications + comparison output for the K3TR and K3TC. The operands HH, H, L, and LL are for the K3TR, and the operands O5, O4, O3, O2, and O1 are for the K3TC.

3.Not available for the K3TC.

4.Ladder Interface Settings

YES: User settings are required for the 2nd and 3rd operands of PMCR.

NO:	Send word allocation:	Set a dummy word address for the 3rd operand (D).
	Receive word allocation:	Set the constant 0000 for the 2rd operand (S).

284