Omron CQM1H-SCB41 operation manual Read Holding Data PH Continuous Units Sequence No, Appendix

K3Tj Intelligent Signal Processor Protocol					Appendix I
	Receive Data Word Allocation (3rd Operand of PMCR)
	Receive data	+0	Number of receive data words
	storage words
		+1	Peak/bottom data
		+2	(Undefined)		Peak/bottom data
		+3	(Undefined)	Status
		~
				~

+94

+95

+96

Peak/bottom data

(Undefined)

(Undefined) Status

Peak/bottom data

Offset	Contents (data format)			Data
+0	Number of receive data	0004 to 0097
	words (4 digits BCD)
+1 to	Peak/bottom data	00000 to 99999
+2	(5 digits BCD)	Negative sign: F (most significant digit)
		Example 12345		Example –1234
		+1		+1
			2345			1234
		+2		+2
			0001			000F
+3	Status	d0 bit:
	(2 digits Hex)	If overflow: 1		Others: 0
		d1 bit:
		If underflow: 1		Others: 0
		d2 bit:
		Not used
		d3 bit:
		During forced zero operation: 1				Others: 0
		(K3TH,K3TR: 0)
		d4 bit:
		Not used
		d5 bit:
		During hold input: 1			Others: 0
		d6 bit:
		Bank input 1: 1			Others: 0
		(K3TH, K3TX: 0)
		d7 bit:
		Bank input 2: 1			Others: 0
		(K3TH, K3TX: 0)
	D
	D
	D
+96	Status	Same as above

Read Holding Data PH (Continuous Units) (Sequence No. 333)

This sequence reads peak holding data for continuous units.

Send Data Word Allocation (2nd Operand of PMCR)

First word of +0

send data

+1

Number of send data words

(Undefined) Number of units

Offset	Contents (data format)	Data
+0	Number of send data words	0002
	(4 digits BCD)
+1	Number of units (2 digits BCD)	01 to 32

Receive Data Word Allocation (3rd Operand of PMCR)

The data allocation is similar to sequence No. 332 (Read Holding Data (by Unit Number)).

298