Omron CQM1H-SCB41 operation manual 327

3Z4L Laser Micrometer Protocol					Appendix K
	Offset	Contents (data format)			Data
	+30 to	Reference value	Same as lower limit values
	+32
	+33	Analog output scale number	1 to 3
		(1 digit BCD)
	+34 to	Offset classification (ASCII	4F4620 (“OF”), 4F4D20 (“OM”)
	+35	3 characters)
	+36 to	Offset value	Same as lower limit values
	+38
	+39	Data output conditions	0 to 6
		(1 digit BCD)
	+40	Scheduled output timer	000 to 999
		(3 digits BCD)
	+41	Sample measurement pulse	000 to 999
		(3 digits BCD)
	+42 to	Sample measurement	415647 (“AVG”), 4D4158 (“MAX”)
	+43	classification	4D494E (“MIN”), 524E47 (“RNG”)
		(ASCII 3 characters)
	+44 to	Unused	Undefined
	+45
	+46	Yes/No for segment setting	Set:	1	(SG)
		(1 digit BCD)	Don’t set: 0
	+47	Yes/No for measurement	Set:	1	(M)
		interval number setting	Don’t set: 0
		(1 digit BCD)
	+48	Yes/No for upper/lower limit	Set:	1	(LL,LH)
		value setting	Don’t set: 0
		(1 digit BCD)
	+49	Yes/No for multistep	Set:	1	(L1,L2,L3,L4,L5,L6)
		selection limit value	Don’t set: 0
		(1 digit BCD)
	+50	Yes/No for reference setting	Set:	1	(REF, SCL)
		(1 digit BCD)	Don’t set: 0
	+51	Yes/No for offset value	Set:	1	(OF or OM)
		setting (1 digit BCD)	Don’t set: 0
	+52	Yes/No for data output	Set:	1	(PR, PRT)
		condition setting	Don’t set: 0
		(1 digit BCD)
	+53	Yes/No for sample	Set:	1	(SMP, MAX or MIN or RNG or AVG)
		measurement pulse setting	Don’t set: 0
		(1 digit BCD)

Receive Data Word Allocation (3rd Operand of PMCR)

None.

Note 1. This sequence cannot be used to set the error lower limit (EL), error upper limit (EH), error exclusion counter (CNT) of the error data exclusion function (centerless grinder function).

2.The following settings must be made together with this sequence; they cannot be set separately. Lower limit, upper limit

Multistep selection limit

Reference value, analog output scale number Data output conditions, scheduled print timer

3.The limit value, reference value, and offset value can be set to 3 digits for the integer portion and to 4 dig- its for the decimal portion.

327