Omron CQM1H-SCB41 operation manual Memory Switch Set 2 3000-series, High-speed Type Sequence No

3Z4L Laser Micrometer Protocol Appendix K

Memory Switch Set 2 (3000-series, High-speed Type) (Sequence No. 422)

This sequence sets memory switches.

Send Data Word Allocation (2nd Operand of PMCR)

First word of send +0

data

+1

+2

	Number of send data words
W		X	Y	Z
	(Undefined)			V

Offset	Contents (data format)		Data
+0	Number of send data words	0003 (fixed)
	(4 digits BCD)
+1	w (1 digit BCD)	0: Work automatic detection is not performed
		1: Work automatic detection is performed
			Diameter detection method (1 scan)
		2: Work automatic detection is performed
			Diameter detection method (8 scan)
		3: Work automatic detection is performed
			Position detection method (1 scan)
	x (1 digit BCD)	For expansion
		0 (fixed)
	y (1 digit BCD)	For expansion
		0 (fixed)
	z (1 digit BCD)	For expansion
		0 (fixed)
+2	v (1 digit BCD)	*0:	Error data exclusion function is not used
		1:	Error data exclusion function is used

Note Settings marked with asterisks are required for this protocol.

Receive Data Word Allocation (3rd Operand of PMCR)

None.

Note Memory switches cannot be set when DIP switch SW3, pin 5 of the Laser Micrometer is not turned ON.

Simple AVG Times Set (3000-series, High-speed Type) (Sequence No. 423)

This sequence uses the simple average as the averaging method and sets the averaging times per measurement interval 4.

Send Data Word Allocation (2nd Operand of PMCR)

First word of send +0

data

+1

Number of send data words

Number of averaging times

Offset	Contents (data format)	Data
+0	Number of send data words	0002 (fixed)
	(4 digits BCD)
+1	Number of averaging times	1 to 2048
	(4 digits BCD)

Receive Data Word Allocation (3rd Operand of PMCR)

None.

Note This sequence cannot be used when DIP switch SW3, pin 5 of the Laser Micrometer is not turned ON.

336