Omron CQM1H-SCB41 operation manual Single Run Measurement Start 4000-series Sequence No

3Z4L Laser Micrometer Protocol					Appendix K
	Offset	Contents (data format)	Data
	+0	Number of receive data	0019 (fixed)
		words (4 digits BCD)
	+1	Segment number	1 to 5
		(1 digit BCD)
	+2	Measurement interval	1 to 7
		number (1 digit BCD)
	+3	Lower limit value (Decimal	0000 to 9999	Example –123.4567
		portion)
				+3	4 5 6 7
		(4 digits BCD)
				+4	0 1 2 3
	+4	Lower limit value (Integer	000 to 999
		portion)
				+5	F 0 0 0
		(3 digits BCD)
	+5	Lower limit value (Sign)	If +: 0
		(BIN)	If –: F
	+6 to	Upper limit value	Same as lower limit value
	+8
	+9 to	Reference value	Same as lower limit value
	+11
	+12	Analog output scale number	0 to 3
		(1 digit BCD)
	+13 to	Forced zero number (ASCII	5A45524F2B (“ZERO+”)
	+15	5 characters)	4E4F524D20 (“NORM ”)
			5A45524F2D (“ZERO–”)
	+16	Data output condition	0 to 6
		(1 digit BCD)
	+17	Data output timer value	000 to 999
		(3 digits BCD)
	+18	Number of seconds for latch	00 to 99
		timer
		(2 digits BCD)

Note This sequence can be used for the 3Z4L-4000 Series only when pin 8 on DIP switch SW2 is turned ON.

Single Run Measurement Start (4000-series) (Sequence No. 434)

When the sample measurement condition is from 1 to 999, this sequence performs a single run measurement and requests the measurement results.

Send Data Word Allocation (2nd Operand of PMCR)

None.

Receive Data Word Allocation (3rd Operand of PMCR)

Receive data	+0	Number of receive data words
storage words
	+1		Decision result
	+2		Decimal portion
	+3	(Undefined)	Integer portion
	+4	Sign	(Undefined)
	+5		Decimal portion
	+6	(Undefined)	Integer portion
	+7	Sign	(Undefined)

Measurement value

Deviation value

343