Omron CQM1H-SCB41 Continuous Measurement Execution Interrupt F200 Sequence No, Appendix L

Visual Inspection System Protocol						Appendix L
	Offset	Content (data format)				Data
	+0	Number of receive data words	0006
		(4 digits BCD)
	+1	Output No. (2 digits BCD)	00 to 07
	+2	Evaluation result (1 digit BCD)	0:	OK
			1:	NG
	+3 to	Measurement value (decimal portion)	Example			Example
	+5	(3 digits BCD)	–123.456			+123.456
			+3		3456	+3	3456
		Measurement value (integer portion)
		(7 digits BCD)	+4		0012	+4	0012
			+5			+5
					F000		0000
		Measurement value (sign)
		(1 digit)	F is stored for negative values.

Note 1. Only one output No. can be designated.

2.Turn OFF CIO 28911 (if port A is used) or CIO 28915 (if port B is used) to terminate this sequence.

3.The ranges of measurement values are as follows:

For calibration OFF setting : –2147483.648 to 2147483.647

For calibration ON setting : –9999999.999 to 9999999.999

4.If a measurement value exceeds the range of measurement values when calibration is turned off, unde- fined data is stored in the specified words.

Continuous Measurement Execution (Interrupt) (F200) (Sequence No. 452)

This sequence carries out continuously setting the F200 and stores measurement results in the specified words. The interrupt notification method is used for the receive data. The interrupt No. is 102.

Send Data Word Allocation (2nd Operand of PMCR)

None.

Receive Data Word Allocation (3rd Operand of PMCR)

Receive data +0

storage words	+1
	+2
	+3
	+4
	+5

Number of receive data words

(Undefined)				Output No.
	(Undefined)				Evaluation
					result
			Decimal portion
		Integer portion
Sign		0

Measurement value

Offset	Content (data format)				Data
+0	Number of receive data words	0006
	(4 digits BCD)
+1	Output No. (2 digits BCD)	00 to 07
+2	Evaluation result (1 digit BCD)	0:	OK
		1:	NG
+3 to	Measurement value (decimal portion)	Example			Example
+5	(3 digits BCD)	–123.456			+123.456
		+3		3456	+3	3456
	Measurement value (integer portion)
	(7 digits BCD)	+4		0012	+4	0012
		+5			+5
				F000		0000
	Measurement value (sign)
	(1 digit)			F is stored for negative values.

Note 1. Only one output No. can be designated.

2. Turn OFF CIO 28911 (if port A is used) or CIO 28915 (if port B is used) to terminate this sequence.

353