Omron CQM1H-SCB41 operation manual General-purpose Command 1 4000-series Sequence No

3Z4L Laser Micrometer Protocol Appendix K

General-purpose Command 1 (4000-series) (Sequence No. 444)

This general-purpose command is used to send data with a specified data length, and receive back only OK. The terminator (CR) is automatically attached to the send data.

Send Data Word Allocation (2nd Operand of PMCR)

First word of +0

send data	+1
	+2
	+3

Number of send data words

Send data byte length

Send data

Send data

		D
		D
+128		Send data
+129		Send data	CR
	Offset	Contents (data format)			Data
	+0	Number of send data words		0003 to 0129
		(4 digits BCD)
	+1	Send data byte length (4 digits BCD)		0001 to 0255
				The number of bytes of send data
				excluding the terminator (CR)
	+2 to	Send data (ASCII)		Send data up to 255 bytes maximum
	+129			Specify in ASCII.

Receive Data Word Allocation (3rd Operand of PMCR)

None.

346