20. Frequency Response, HP 8593EM

Figure 2-25. Frequency Response Test Setup, ￿50 MHz, HP 8593EM

Procedure

1.Zero and calibrate the measuring receiver and 50 MHz to 26.5 GHz power sensor in LOG mode as described in the measuring receiver operation manual.

2.Connect the equipment as shown in Figure 2-25.

3.Press instrument preset on the synthesized sweeper. Set the synthesized sweeper controls as follows:

CW : : : : :: :: : : : : : :: : : : :: : : : : : : : :: :: :: :: : : : : : : : : : : : :: : : : :: : : : :300 MHz

FREQ STEP : : :: : : : : :: : :: : : : : : : : : : : : : : : : : : : : : : : :: : : : : : : : :: : : 100 MHz

POWER LEVEL : :: :: : : : : : : : : :: : : : : : : : : : : : :: :: :: :: : : : : : : : :: : 08 dBm

4.On the EMC analyzer, press 4PRESET5, then wait for the preset routine to ￿nish. Press the following analyzer keys:

4FREQUENCY5 More 1 of 2 Band Lock 0-2.9 Gz BAND 0

4FREQUENCY5 300 4MHz5

CF STEP AUTO MAN (MAN) 100 4MHz5

4SPAN5 10 4MHz5

4AMPLITUDE 5 REF LVL 97 4+dB￿V5

SCALE LOG LIN (LOG) 1 4dB5

4BW5 IF BW AUTO MAN (MAN) 1 4MHz5

AVG BW AUTO MAN (MAN) 10 4kHz5

2-106 Performance Veri￿cation Tests