21. Frequency Response, HP 8594EM
Figure
Procedure
1.Zero and calibrate the measuring receiver and 50 MHz to 2.9 GHz power sensor in log mode as described in the measuring receiver operation manual.
2.Connect the equipment as shown in Figure
3.Press 4INSTR PRESET5 on the synthesized sweeper, then set the controls as follows:
CW : : : : :: :: : : : : : : : : : : : : : : :: : : :: : :: :: : : : :: : : :: : : : : : : : : : : : : : : :300 MHz
FREQ STEP : : : : : : : : : : : : : : : :: : : : :: : : :: : : : : : : : : : : : : :: : : : : : : : : 100 MHz
POWER LEVEL : : : :: : : : :: : : :: : : : :: : : :: : : : :: :: :: :: : :: : : : : : : : 08 dBm
4.On the EMC analyzer, press 4PRESET5. Wait for the preset to nish, then set the EMC analyzer controls by pressing the following keys:
4FREQUENCY5 300 4MHz5
CF STEP AUTO MAN (MAN) 100 4MHz5
4SPAN5 5 4MHz5
4AMPLITUDE5 97 4+dBV5
SCALE LOG LIN (LOG) 1 4dB5
4AMPLITUDE5 More 1 of 3 More 2 of 3 COUPLE AC DC (DC)
4BW5 1 4MHz5
AVG BW AUTO MAN (MAN) 10 4kHz5
5.On the EMC analyzer, press 4MKR !5 MARKER ! HIGH , 4MKR5
MK TRACK ON OFF (ON).