8. Frequency Span Readout Accuracy, HP 8591EM

7. Press More 1 of 3 More 2 of 3 MARKER 1 , then continue pressing

More 3 of 3 NEXT PK RIGHT until the marker 1 is on the right-most signal (1700 MHz).

8.Record the MKR 1 frequency reading as TR Entry 1 of the performance veri￿cation test record.

The MKR 1 reading should be between 1446 MHz and 1554 MHz.

Figure 2-9.

10.1MHz to 10 kHz Frequency Span Readout Accuracy Test Setup, HP 8591EM

Part 2: 10.1 MHz to 10 kHz Frequency Span Readout A ccuracy

Perform \Part 1: 1800 MHz Frequency Span Readout Accuracy" before performing this procedure.

1.Connect the equipment as shown in Figure 2-9. Note that the power splitter is used as a combiner.

2.Press 4PRESET5 on the EMC analyzer, then wait for the preset routine to ￿nish. Set the EMC analyzer by pressing the following keys:

4FREQUENCY5 70 4MHz5

4SPAN5 10.1 4MHz5

2-34 Performance Veri￿cation Tests