5. Frequency Readout and Marker Count Accuracy, HP 8593EM, HP 8595EM, and HP 8596EM
12.Record the MKR frequency reading as TR Entry 16 of the performance verication test record. The reading should be within the limits of 1.49999924 GHz and 1.50000076 GHz.
\Part 1: Frequency Readout Accuracy" is now complete. Continue with \Part 2: Marker Count Accuracy."
Part 2: Marker Count A ccuracy
Perform \Part 1: Frequency Readout Accuracy" before performing this procedure.
1.Press 4PRESET5 on the EMC analyzer, then wait for the preset routine to nish.
2.Set the EMC analyzer to measure the marker count accuracy by pressing the following keys:
4FREQUENCY5 1.5 4GHz5
4SPAN5 20 4MHz5
4BW5 IF BW AUTO MAN (MAN) 300 4kHz5
4MKR5 More 1 of 3 MK COUNT ON OFF (ON)
More 2 of 3 CNT RES AUTO MAN (MAN) 100 4Hz5
3.Press 4MKR !5 MARKER ! HIGH , then wait for a count to be taken (it may take several seconds).
4.Record the CNTR frequency reading as TR Entry 17 of the performance verication test record. The reading should be within the limits shown in Table