3Com Switch 7750 Series
Command Reference Guide – Login Chapter 1 Login Commands
1-2
Example
# Configure to authenticate users using the local password on the AUX interface.
<3Com> system-view
System View: return to User View with Ctrl+Z.
[3Com] user-interface aux 0
[3Com-ui-aux0] authentication-mode password
1.1.2 auto-execute command Syntax
auto-execute command text
undo auto-execute command
View
User interface view
Parameter
text: Command to be executed automatically.
Description
Use the auto-execute command command to set the command that is executed
automatically after a user logs in.
Use the undo auto-execute command command to disable the specified command
from being automatically executed.
Normally, the telnet command is specified to be executed automatically to enable the
user to Telnet to a specific network device automatically.
By default, no command is automatically executed.
Caution:
z The auto-execute command command may cause you unable to perform
common configuration in the user interface, so use it with caution.
z Before executing the auto-execute command command and save your
configuration, make sure you can log into the switch in other modes and cancel the
configuration.