3Com Switch 7750 Series
Command Reference Guide – Login Chapter 1 Login Commands
1-7
Description
Use the flow-control command to configure the flow control mode of the user
interface.
Use the undo flow-control command to restore the default flow control mode of the
user interface.
By default, flow control is not performed.
This command can only be executed in AUX user interface view.
Example
# Set flow control mode to software flow control.
<3Com> system-view
System View: return to User View with Ctrl+Z.
[3Com] user-interface aux 0
[3Com-ui-aux0] flow-control software
1.1.7 free user-interface Syntax
free user-interface [ type ] number
View
User view
Parameter
type: User interface type.
number: Index of the user interface. This argument can be an absolute user interface
index (if you do not provide the type argument) or a relative user interface index (if you
provide the type argument).
Description
Use the free user-interface command to release a specified user interface. If you
execute this command, the corresponding user interface will be disconnected.
Note that the current user interface cannot be released.
Example
# Release user interface VTY 0.
<3Com> free user-interface vty 0
Are you sure you want to free user-interface vty0 [Y/N]? y
[OK]