3Com Switch 7750 Series
Command Reference Guide – Routing Protocol Chapter 6 IP Routing Policy Configuration Commands
6-13
Parameter
value: Route cost value, ranging from 0 to 4,294,967,295.
Description
Use the if-match cost command to configure one of the match rules of the
route-policy to match the cost of routing information.
Use the undo if-match cost command to cancel the configuration of the match rule.
By default, no if-match statement is defined.
An if-match statement of the route-policy specifies the route cost of the routing
information meeting the condition.
Related command: if-match interface, if-match acl, if-match ip-prefix, if-match ip
next-hop, if-match tag, route-policy, apply ip next-hop, apply cost, apply
local-preference, apply origin, and apply tag.
Example
# Define an if-match statement and allow the routing information with a routing cost of
8 to pass this if-match statement.
<3Com> system-view
System View: return to User View with Ctrl+Z.
[3Com] route-policy policy permit node 1
%New sequence of this list
[3Com-route-policy] if-match cost 8
6.1.16 if-match interface Syntax
if-match interface { interface-type interface-number }
undo if-match interface
View
Route policy view
Parameter
interface-type: Interface type.
interface-number: Interface number.
Description
Use the if-match interface command to configure to match the route whose next hop
is the designated interface.