3Com 7750 Series Chapter 1 PoE Configuration Commands

3Com Switch 7750 Series
Command Reference Guide – PoE Chapter 1 PoE Configuration Commands
1-1
Chapter 1 PoE Configuration Commands
1.1 PoE Configuration Commands
1.1.1 display poe interface
Syntax
display poe interface { interface-type interface-number | all }
View
Any view
Parameter
interface-type interface-number: Port on the switch. Refer to Command Manual – Basic
Port Configuration for details.
all: Displays the PoE information of all the PoE ports on the switch.
Description
Use the display poe interface command to view the PoE status of a specific port. If the
all keyword is specified, the command displays the PoE status of all the PoE ports.
Example
# Display the PoE status of Ethernet3/0/1.
<3Com> display poe interface Ethernet 3/0/1
Port power status :PD searching
Port power mode :signal
Port PD class :0
port power priority :low
Port max power :15400 mW
Port current power :0 mW
Port average power :0 mW
Port peak power :0 mW
Port current :0 mA
Port voltage :0.0 V