3Com 7750 Series - page 325

3Com Switch 7750 Series

Command Reference Guide – Routing Protocol Chapter 2 RIP Configuration Commands

2-4

View

Any view

Parameter

None

Description

Use the display rip routing command to display RIP routing information.

Example

# Display RIP routing table information.

<3Com> display rip routing

RIP routing table: public net

A = Active I = Inactive G=Garbage collection

Destination/Mask Cost NextHop Age SourceGateway Att

6.0.0.0/8 1 10.153.25.22 4s 10.153.25.22 A

Table 2-2 Description on the fields of the display rip routing command

Field Description

Destination/Mask Destination address/Mask

Cost Cost

NextHop Net hop address

Age The time that a route exists in the routing

table, namely, the aging time

SourceGateway Gateway originating the route

Attribute value, which may be one of the

three following values:

A Active routes

I Inactive routes

Att

Unreachable route in the state of

garbage collection. If garbage

collection times out, and the

unreachable route does not receive

update messages from the same

neighbor, the route will be removed

from the routing table completely.