3Com Switch 7750 Series
Command Reference Guide — Basic Port Commands Chapter 1 Port Basic Configuration Commands
1-23
Use the undo port hybrid pvid command to restore the default VLAN ID of the hybrid
port.
Set the default VLAN ID of the local hybrid port to the same value as that of the hybrid
port on the peer switch. Otherwise, packets cannot be forwarded properly.
Related command: port link-type.
Example
# Set the default VLAN ID of the hybrid port Ethernet1/0/1 to 100.
<3Com> system-view
System View: return to User View with Ctrl+Z.
[3Com] interface Ethernet1/0/1
[3Com-Ethernet1/0/1] port hybrid pvid vlan 100
1.1.24 port hybrid vlan Syntax
port hybrid vlan vlan-id-list { tagged | untagged }
undo port hybrid vlan vlan-id-list
View
Ethernet port view
Parameter
vlan-id-list: VLAN range to which the hybrid port will be added. vlan-id-list = [ vlan-id1
[ to vlan-id2 ] ]&<1-10>, where, vlan-id is in the range of 1 to 4094 and can be discrete,
and &<1-10> means you can input up to ten VLAN IDs/ID ranges.
tagged: Keeps VLAN tags when the packets of the specified VLANs are forwarded.
untagged: Keeps no VLAN tags when the packets of the specified VLANs are
forwarded.
Description
Use the port hybrid vlan command to add the hybrid port into specified VLANs.
Use the undo port hybrid vlan command to remove the hybrid port from specified
existing VLANs.
A hybrid port can belong to multiple VLANs. When you use the command several times,
all VLAN specified in the commands will be allowed to pass the port.
The VLAN specified by the vlan-id argument must be existing. Otherwise, this
command is invalid.
Related command: port link-type.