3Com 7750 Series - page 310

3Com Switch 7750 Series
Command Reference Guide – Routing Protocol Chapter 1 Static Route Configuration Commands
1-6
z display ip routing-table ip-address mask
This command only displays the routes exactly matching the specified destination
address and mask.
z display ip routing-table ip-address longer-match
This command displays all destination address routes matching the specified
destination address in the natural mask range.
z display ip routing-table ip-address mask longer-match
This command displays all destination address routes matching the specified
destination address in the specified mask range.
Example
# There is a corresponding route in the natural mask range. Display the summary.
<3Com> display ip routing-table 169.0.0.0
Destination/Mask Protocol Pre Cost Nexthop Interface
169.0.0.0/16 Static 60 0 2.1.1.1 LoopBack1
For detailed description of the output information, see Table 1-1.
# There is no corresponding route (only the longest matching route is displayed) in the
natural mask range. Display the summary.
<3Com> display ip routing-table 169.253.0.0
Destination/Mask Protocol Pre Cost Nexthop Interface
169.0.0.0/8 Static 60 0 2.1.1.1 LoopBack1
# There are corresponding routes in the natural mask range. Display detailed
information.
<3Com> display ip routing-table 169.0.0.0 verbose
Routing Tables:
Generate Default: no
+ = Active Route, - = Last Active, # = Both * = Next hop in use
Summary count:2
**Destination: 169.0.0.0 Mask: 255.0.0.0
Protocol: #Static Preference: 60
*NextHop: 2.1.1.1 Interface: 2.1.1.1(LoopBack1)
Vlinkindex: 0
State: <Int ActiveU Static Unicast>
Age: 3:47 Cost: 0/0 Tag: 0
**Destination: 169.0.0.0 Mask: 255.254.0.0
Protocol: #Static Preference: 60
*NextHop: 2.1.1.1 Interface: 2.1.1.1(LoopBack1)
Vlinkindex: 0
State: <Int ActiveU Static Unicast>