3Com 7750 Series 2.1.7 host-route

3Com Switch 7750 Series
Command Reference Guide – Routing Protocol Chapter 2 RIP Configuration Commands
2-7
You can control the range of routes received by RIP by specifying an ACL, ip-prefix list
and routing policies.
Related command: acl, filter-policy export, ip ip-prefix.
Example
# Configure to filter incoming routing information by acl 2000.
<3Com>system-view
System View: return to User View with Ctrl+Z.
[3Com] rip
[3Com-rip] filter-policy 2000 import
2.1.7 host-route
Syntax
host-route
undo host-route
View
RIP view
Parameter
None
Description
Use the host-route command to enable RIP to accept host routes.
Use the undo host-route command to reject host routes.
By default, RIP accepts host routes.
In some special cases, RIP receives a great number of host routes from the same
network segment. These routes are of little help to path searching and occupy a lot of
resources. In this case, the undo host-route command can be used to reject host
routes.
Example
# Enable RIP to reject host routes.
<3Com> system-view
System View: return to User View with Ctrl+Z.
[3Com] rip
[3Com-rip] undo host-route