3Com Switch 7750 Series
Command Reference Guide – QoS Chapter 1 QoS Commands
1-31
Keyword 802.1p priority (decimal) 802.1p priority value
(binary)
network-management 7 111
Note:
If you have redirected the packets to CPU, it is not recommended to set the 802.1p
priority to 7, and vice versa.
local-precedence pre-value: Sets local precedence. The pre-value argument ranges
from 0 to 7.
Description
Use the traffic-priority command to enable ACLs for remarking priority.
Use the undo traffic-priority command to remove the function of remarking priority .
Related command: display qos-interface traffic-priority.
Note:
Only the permit rule can be referenced in this command and applied to hardware.
Example
# Remark the local precedence of the packets matching the permit rule in ACL 2000 as
0.
<3Com> system-view
[3Com] interface Ethernet1/0/1
[3Com-Ethernet1/0/1] qos
[3Com-qoss-Ethernet1/0/1] traffic-priority outbound ip-group 2000
local-precedence 0
1.1.24 traffic-red Syntax
traffic-red outbound acl-rule [ system-index ]
qstart qstop probability