3Com Switch 7750 Series
Command Reference Guide – ACL Chapter 1 ACL Commands
1-4
By default, the configured ACL rules sent to a port take effect in the depth-first order.
Use the acl match-order { config | auto } command to set the match order of ACL
rules when they are configured (before they are sent to a port). While use the acl
order command is to set the match order of ACL rules after they are configured (after
they are sent to a port).
Example
# Configure the match order of ACL rules sent to a port as first-config-first-match order.
<3Com>system-view
System View: return to User View with Ctrl+Z.
[3Com] acl order first-config-first-match
1.1.4 display acl config Syntax
display acl config { all | acl-number | acl-name }
View
Any view
Parameter
all: Displays all ACLs (including those identified by a number or a name).
acl-number: Sequence number of the ACL to be displayed. It can be a number chosen
from 2000~5999.
acl-name: Name of the ACL to be displayed. It is a case insensitive character string
started with an English letter (a-z or A-Z), and there should not be a space or quotation
mark in it; the all keyword is not allowed to use in it.
Description
Using the display acl config command, you can view the detailed configuration
information of an ACL, including every subrule, sequence number and the times
matched with this rule.
The matched times displayed by this command is software matched times, namely,
the matched times of ACL to be processed by switch CPU. You can use the
traffic-statistic command to calculate the matched times of hardware during
packet-forwarding. You can use the display qos-interface traffic-statistic command
to view the calculation result. For the traffic-statistic and display qos-interface
traffic-statistic commands, refer to the QoS part of the Command Manual.
Example
# Display all content of ACL.