3Com 7750 Series 1.1.9 snmp-agent , 1.1.10 snmp-agent community

3Com Switch 7750 Series
Command Reference Guide – SNMP & RMON Chapter 1 SNMP Configuration Commands
1-9
[3Com] snmp-agent trap enable
[3Com] snmp-agent target-host trap address udp-domain 10.1.1.1 params
securityname public
[3Com] interface ethernet6/0/1
[3Com-Ethernet6/0/1] enable snmp trap updown
1.1.9 snmp-agent
Syntax
snmp-agent
undo snmp-agent
View
System view
Parameter
None
Description
Use the snmp-agent command to enable SNMP Agent.
Use the undo snmp-agent command to disable SNMP Agent.
By default, SNMP Agent is disabled.
Example
# Disable running SNMP Agent.
<3Com> system-view
System View: return to User View with Ctrl+Z.
[3Com] undo snmp-agent
1.1.10 snmp-agent community
Syntax
snmp-agent community { read | write } community-name [ [ acl acl-number |
mib-view view-name ]*
undo snmp-agent community community-name
View
System view