3Com Switch 7750 Series
Command Reference Guide – Login Chapter 1 Login Commands
1-25
Example
# Configure that commands of level 0 are available to the users logging into VTY 0.
<3Com> system-view
System View: return to User View with Ctrl+Z.
[3Com] user-interface vty 0
[3Com-ui-vty0] user privilege level 0
# You can verify the above configuration by Telneting to VTY 0 and displaying the
available commands, as listed in the following.
<3Com> ?
User view commands:
cluster Run cluster command
debugging Enable system debugging functions
language-mode Specify the language environment
ping Send echo message
quit Exit from current command view
super Privilege current user a specified priority level
telnet Establish one TELNET connection
tracert Trace route function
undo Cancel current setting