3Com Switch 7750 Series
Command Reference Guide – Routing Protocol Chapter 5 BGP Configuration Commands
5-51
ip-address: Resets connection with a specified BGP peer.
group group-name: Resets the connection with a specified peer group.
Description
Use the reset bgp ip-address command to reset the connection of BGP with a
specified BGP peer.
Use the reset bgp all command to reset all the connections with BGP.
Use the reset bgp group group-name command to reset the BGP connection with a
specified peer group.
After a BGP routing policy or protocol configuration changes, resetting the BGP
connection will make the new configured policy take effect immediately.
Example
# After using the timer command to configure new Keepalive and Holdtime intervals,
you can reset all BGP connections for the new configuration to take effects
immediately.
<3Com> reset bgp all
5.1.59 reset bgp dampening Syntax
reset bgp dampening [ network-address [ mask ] ]
View
User view
Parameter
network-address: IP address of the network segment, in dotted decimal notation.
mask: Network mask.
Description
Use the reset bgp dampening command to reset the flapping attenuation
information of a route and release the suppression of a suppressed route.
Related command: dampening, and display bgp routing-table dampened.
Example
# Reset the route attenuation information of the specified route.
<3Com> reset bgp dampening 20.1.0.0 255.255.0.0