3Com Swich 7750 Series
Command Reference Guide – Information Center Chapter 1 Information Center Commands
1-21
System View: return to User View with Ctrl+Z.
[3Com] info-center timestamp debugging boot
1.1.16 info-center trapbuffer Syntax
info-center trapbuffer [ channel { channel-number | channel-name } | size
buffersize ]*
undo info-center trapbuffer [ channel | size ]
View
System view
Parameter
size: Configures the size of the trap buffer.
buffersize: Size of trap buffer (numbers of messages). This argument ranges from 0 to
1,024 and defaults to 256.
channel: Sets the channel through which information is sent to the trap buffer.
channel-number: Channel number, ranging from 0 to 9, that is, the system has ten
channels.
channel-name: Channel name. By default, the name of channel 0 to channel 9 is (in
turn) console, monitor, loghost, trapbuffer, logbuffer, snmpagent, channel6,
channel7, channel8, channel9.
Description
Use the info-center trapbuffer command to enable information output to the trap
buffer.
Use the undo info-center trapbuffer command to disable information output to the
trap buffer.
This command takes effect only after the information center function is enabled.
Related command: info-center enable and display info-center.
Example
# Send information to the trap buffer and sets the size of buffer to 30.
<3Com>system-view
System View: return to User View with Ctrl+Z.
[3Com] info-center trapbuffer size 30