3Com 7750 Series 1.3 HWTACACS Configuration Commands

3Com Switch 7750 Series

Command Reference Guide – AAA, RADIUS, HWTACACS, EAD Chapter 1 AAA & RADIUS & HWTACACS

Configuration Commands

1-54

1.3 HWTACACS Configuration Commands

Syntax

data-flow-format data { byte | giga-byte | kilo-byte | mega-byte }

data-flow-format packet { giga-packet | kilo-packet | mega-packet | one-packet }

undo data-flow-format { data | packet }

View

HWTACACS view

Parameter

data: Sets data unit.

byte: Sets 'byte' as the unit of data flow.

giga-byte: Sets 'giga-byte' as the unit of data flow.

kilo-byte: Sets 'kilo-byte' as the unit of data flow.

mega-byte: Sets 'mega-byte' as the unit of data flow.

packet: Sets data packet unit.

giga-packet: Sets 'giga-packet' as the unit of packet flow. This means each

giga-packet contains 1 G packets.

kilo-packet: Sets 'kilo-packet' as the unit of packet flow. This means each kilo-packet

contains 1 K packets.

mega-packet: Sets 'mega-packet' as the unit of packet flow. This means each

mega-packet contains 1 M packets.

one-packet: Sets 'one-packet' as the unit of packet flow. This means each one-packet

contains one packet.

Description

Use the data-flow-format command to configure the unit of data flows sent to the

TACACS server.

Use the undo data-flow-format command to restore the default.

By default, the data unit is byte and the data packet unit is one-packet.

Related command: display hwtacacs.

Example

# Set the unit of data flow destined for the HWTACACS server to kilo-byte and the data

packet unit to kilo-packet.