3Com 7750 Series 1.1.33 speedup

3Com Switch 7750 Series
Command Reference Guide — Basic Port Commands Chapter 1 Port Basic Configuration Commands
1-30
 Note:
For ports of different types, the parameter prompts after you enter the speed command
are also different.
Description
Use the speed command to set the port speed.
Use the undo speed command to restore the port speed to the default setting.
By default, the port speed is in the auto-negotiation mode.
Example
# Set the speed of Ethernet1/0/1 to 10 Mbps.
<3Com> system-view
System View: return to User View with Ctrl+Z.
[3Com] interface Ethernet 1/0/1
[3Com-Ethernet1/0/1] speed 10
1.1.33 speedup
Syntax
speedup enable
speedup disable
View
System view
Parameter
None
Description
Use the speedup enable command to enable the hardware speedup function outside
the port.
Use the speedup disable command to disable the hardware speedup function outside
the port.
By default, the hardware speedup function outside the port is disabled.