3Com Switch 7750 Series
Command Reference Guide – System Maintenance & Debugging Chapter 3 Device Management
Commands
3-17
confirm?[Y/N]:y
<3Com>
%Apr 6 16:21:03 2005 S7750R CMD/5/REBOOT:
aux0: schedule reboot parameters at 16:21:00 2005/04/06. And system will reboot
at 22:00:2005 04/06/2005.
3.1.23 schedule reboot delay Syntax
schedule reboot delay { hhh:mm | mmm }
undo schedule reboot
View
User view
Parameter
hhh:mm: Reboot waiting delay, in the format of “hour:minute”. hh ranges from 0 to 720,
and mm ranges from 0 to 59.
mmm: Reboot waiting delay, ranging from 0 to 43,200 minutes.
Description
Use the schedule reboot delay command to schedule a reboot on the switch, and set
the reboot waiting delay.
Use the undo schedule reboot command to cancel the scheduled reboot.
By default, no scheduled reboot is set on the switch.
Note:
There is at most one minute defer for scheduled reboot, that is, the switch will reboot
within one minute after waiting for the specified delay.
You can set the reboot waiting delay in two formats: the hours:minutes format and the
absolute minutes format, and both must be less than or equal to 30 × 24 × 60 (that is, 30
days).
After you execute the command, the system will prompt you to confirm. Enter "Y" or "y"
for your setting to take effect. Your setting will overwrite the old one (if available).
If you adjust the system time by the clock command after executing the schedule
reboot delay command, the schedule reboot delay command will be invalid and the
scheduled reboot will not happen.