3Com Switch 7750 Series
Command Reference Guide – Routing Protocol Chapter 3 OSPF Configuration Commands
3-11
3.1.12 display ospf abr-asbr
Syntax
display ospf [ process-id ] abr-asbr
View
Any view
Parameter
process-id: OSPF Process ID, in the range of 1 to 65,535. If you do not specify a
process ID, this command applies to all current OSPF processes.
Description
Use the display ospf abr-asbr command to display the information about the ABR
and ASBR of OSPF.
Example
# Display the information about the OSPF ABRs and ASBRs.
<3Com> display ospf abr-asbr
OSPF Process 1 with Router ID 1.1.1.1
Routing Table to ABR and ASBR
I = Intra i = Inter A = ASBR B = ABR S = SumASBR
Destination Area Cost Nexthop Interface
IA 2.2.2.2 0.0.0.0 10 10.153.17.89 Vlan-interface1
Table 3-1 Description on the fields of the display ospf abr-asbr command
Field Description
Destination Router ID of the ABR or ASBR
Area Area where the router is connected to the
ASBR
Cost Routing overhead value of the route
Nexthop Nexthop address to the destination
Interface Local output interface
3.1.13 display ospf asbr-summary
Syntax
display ospf [ process-id ] asbr-summary [ ip-address mask ]