3Com Switch 7750 Series
Command Reference Guide – AAA, RADIUS, HWTACACS, EAD Chapter 1 AAA & RADIUS & HWTACACS
Configuration Commands
1-48
1.2.24 stop-accounting-buffer enable Syntax
stop-accounting-buffer enable
undo stop-accounting-buffer enable
View
RADIUS scheme view
Parameter
None
Description
Use the stop-accounting-buffer enable command to enable the switch to buffer the
stop-accounting requests that bring no response.
Use the undo stop-accounting-buffer enable command to disable the switch from
buffering the stop-accounting requests that bring no response.
By default, the switch is enabled to buffer the stop-accounting requests that bring no
response.
Stop-accounting requests are critical to billing and will eventually affect the charges;
they are important for both the users and the ISP. Therefore, the NAS should do it s best
to transmit them to the RADIUS accounting server. If the RADIUS accounting server
does not respond to such a request, the switch should first buffer the request on itself,
and then retransmit the request to the RADIUS accounting server until it gets a
response, or the maximum number of transmission attempts is reached (in this case, it
discards the request).
Related command: reset stop-accounting-buffer, radius scheme and display
stop-accounting-buffer.
Example
# Enable the switch to buffer the stop-accounting requests that bring no response from
the servers in RADIUS scheme radius1.
<3Com>system-view
System View: return to User View with Ctrl+Z.
[3Com] radius scheme radius1
[3Com-radius-radius1] stop-accounting-buffer enable