3Com Switch 7750 Series
Command Reference Guide – Routing Protocol Chapter 3 OSPF Configuration Commands
3-53
View
System view
Parameter
process-id: OSPF Process ID, in the range of 1 to 65,535. If you do not specify a
process ID, this command applies to all current OSPF processes.
ifstatechange, virifstatechange, nbrstatechange, virnbrstatechange, ifcfgerror,
virifcfgerror, ifauthfail, virifauthfail, ifrxbadpkt, iftxretransmit, virifrxbadpkt,
viriftxretransmit, originatelsa, maxagelsa, lsdboverflow, and
lsdbapproachoverflow: Types of TRAP packets that the switch produces in case of
OSPF anomalies.
Description
Use the snmp-agent trap enable ospf command to enable the OSPF TRAP
function.
Use the undo snmp-agent trap enable ospf command to disable the OSPF TRAP
function.
This command does not apply to the OSPF processes that are started after the
command is executed.
By default, the switch does not send TRAP packets in case of OSPF anomalies.
For detailed configuration of SNMP TRAP, refer to section "System Management" in
this manual.
Example
# Enable the TRAP function for OSPF process 100.
<3Com> system-view
System View: return to User View with Ctrl+Z.
[3Com] snmp-agent trap enable ospf 100
3.1.49 spf-schedule-interval Syntax
spf-schedule-interval interval
undo spf-schedule-interval
View
OSPF view