3Com Switch 7750 Series
Command Reference Guide – QoS Chapter 1 QoS Commands
1-29
acl-rule: Applied ACL which can be the combination of various ACL rules. For the ways
of type-A LPUs to combine ACLs and the description on related parameters, refer to
Table 1-4 and Table 1-6. For the ways of non-type-A LPUs to combine ACLs and the
description on related parameters, refer to Table 1-5 and Table 1-6.
system-index: Specifies an interior index value which is used when an ACL rule is
applied to the port. The index value ranges from 0 to 4294,967,295. This keyword is
only available when the ACL rule number is specified in the command. After the
specified ACL takes effect, there are three scenarios when you input the index value:
z If you do not input an index value or the index value you input is 0, the system will
automatically assign an index whose value is greater than 0;
z If the input index value is not 0 and does not conflict with the interior index used by
the system, the system will adopt the index value input by you;
z If the input index value is not 0 but conflicts with the interior index used by the
system, the system will reassign an index value.
When the specified ACL rule is not effective, the system will adopt the index value input
by you.
dscp dscp-value: Sets DSCP precedence, ranging from 0 to 63. You can also enter the
keywords in Table 1-8.
Table 1-8 Description on DSCP precedence values
Keyword DSCP value (decimal) DSCP value (binary)
ef 46 101110
af11 10 001010
af12 12 001100
af13 14 001110
af21 18 010010
af22 20 010100
af23 22 010110
af31 26 011010
af32 28 011100
af33 30 011110
af41 34 100010
af42 36 100100
af43 38 100110
cs1 8 001000
cs2 16 010000