3Com Switch 7750 Series
Command Reference Guide – System Maintenance & Debugging Chapter 3 Device Management
Commands
3-4
Parameter
None
Description
Use the display boot-loader command to display the APP file that is adopted when the
switch boots this time and next time.
Example
# Display the APP that will be adopted when the switch reboots.
<3Com> display boot-loader
The primary app to boot of board 0 at the next time is: flash:/ccc.app
The backup app to boot of board 0 at the next time is: flash:/ddd.app
The app to boot of board 0 at this time is: flash:/ccc.app
Table 3-1 Description on the fields of the display boot-loader command
Field Description
The primary app to boot of board 0 at the
next time Primary boot file used by the device for
reboot next time
The backup app to boot of board 0 at the
next time Backup boot file used by the device for
reboot next time
The app to boot of board 0 at this time Boot file used by the device for boot this
time
Syntax
display cpu [ slot slot-number ]
View
Any view
Parameter
slot slot-number: Specifies a slot. The CPU status of the card on the slot is to
displayed.
Description
Use the display cpu command to display the CPU usage of a specified switch.