3Com Switch 7750 Series
Command Reference Guide – Multicast Chapter 2 Common IP Multicast Configuration Commands
2-10
System View: return to User View with Ctrl+Z.
[3Com] multicast load-sharing enable
2.1.7 multicast route-limit Syntax
multicast route-limit limit
undo multicast route-limit
View
System view
Parameter
limit: Limit on the capacity of the multicast routing table, in the range of 0 to 1,024.
Description
Use the multicast route-limit command to limit the capacity of the multicast routing
table. The router will drop the protocols and packets of the new (S, G).
Use the undo multicast route-limit command to restore the default limit on the
capacity of the multicast routing table.
The limit on the capacity of the multicast routing table is 256 by default.
If the number of existing routing entries exceeds the value to be configured when you
configure this command, the existing entries in the routing table will not be removed.
Instead, the system will prompt that the number of existing routing entries is more than
the limit to be configured.
If you execute this command again, the new configuration will overlap the former
configuration.
Example
# Set the limit on the capacity of the multicast routing table to 100.
<3Com> system-view
System View: return to User View with Ctrl+Z.
[3Com] multicast route-limit 100
2.1.8 multicast routing-enable Syntax
multicast routing-enable
undo multicast routing-enable