3Com Switch 7750 Series
Command Reference Guide – Routing Protocol Chapter 7 Route Capacity Configuration Commands
7-4
After this command is used, connections of all the routing protocols will not recover
when the free memory of the switch recovers to a safety value. In this case, you need
to restart the routing protocol to recover the connections.
Use this command with caution.
Related command: memory auto-establish enable, memory { safety | limit },
display memory limit.
Example
# Disable automatic restoration of the routing protocol connections when the free
memory of the current switch recovers.
<3Com> system-view
System View: return to User View with Ctrl+Z.
[3Com] memory auto-establish disable
7.1.4 memory auto-establish enable Syntax
memory auto-establish enable
View
System view
Parameter
None
Description
Use the memory auto-establish enable command to enable automatic restoration
of routing protocol connections when the free memory of the switch recovers to the
specified value.
Use the memory auto-establish disable command to disable this function.
By default, when the free memory of the switch recovers to a safety value,
connections of all the routing protocols will always recover (when the free memory of
the switch decreases to a lower limit, the connection will be disconnected forcibly).
By default, this function is enabled.
Related command: memory auto-establish disable, memory { safety | limit },
display memory limit.
Example
# Enable automatic restoration of the connections of all the routing protocols when the
free memory of the current switch recovers..