3Com Switch 7750 Series
Command Reference Guide — Basic Port Commands Chapter 1 Port Basic Configuration Commands
1-26
1.1.27 port monitor last slot Syntax
port monitor last [ slot slot-number ] value
undo port monitor last [ slot slot-number ]
View
System view
Parameter
slot-number: Number of the slot where the board resides.
value: Delay of reporting down state to the system, in the range of 0 to 60. When this
argument is set to 0, the port will report its state as soon as it is brought down. The
bigger this argument is, the longer delay it takes for a port to report its down state to the
system.
Description
Use the port monitor last command to set the delay of reporting down state to the
system for the ports of all the LPUs or the specified LPU.
Use the undo port monitor last command to restore the delay to the default value.
By default, the delay of reporting down state to the system is 1.
After the setting, you can use the display interface command to display the
information about the field “Port monitor last value”.
Example
# Set the delay of report down state to the system to 10 for the ports on the LPU in slot
5.
<3Com> system-view
System View: return to User View with Ctrl+Z.
[3Com] port monitor last slot 5 10
1.1.28 port trunk permit vlan Syntax
port trunk permit vlan { vlan-id-list | all }
undo port trunk permit vlan { vlan-id-list | all }
View
Ethernet port view