3Com Switch 7750 Series
Command Reference Guide – Multicast Chapter 5 PIM Configuration Commands
5-6
Table 5-1 Description on the fields of the display pim bsr-info command
Field Description
BSR Bootstrap router
Priority Priority of BSR
Mask Length: 30 Length of mask
Expires: 00:01:55 Value of the timer
Syntax
display pim interface [ interface-type interface-number ]
View
Any view
Parameter
interface-type interface-number: Interface type and interface number, used to specify
the VLAN interface.
Description
Use the display pim interface command to view the PIM configuration information of
the interface.
If neither the VLAN interface type nor the VLAN interface number is specified, the PIM
configuration information of all VLAN interfaces is displayed; if both the VLAN interface
type and the VLAN interface number are specified, the PIM configuration information
about the specified VLAN interface is displayed.
Example
# Display the PIM configuration information about the VLAN interface.
<3Com> display pim interface
PIM information of VLAN-interface 2:
IP address of the interface is 10.10.1.20
PIM is enabled on interface
PIM version is 2
PIM mode is Sparse
PIM query interval is 30 seconds
PIM neighbor limit is 128
PIM neighbor policy is none
Total 1 PIM neighbor on interface