3Com 7750 Series Chapter 1 NTP Configuration Commands

3Com Switch 7750 Series

Command Reference Guide – NTP Chapter 1 NTP Configuration Commands

1-1

Chapter 1 NTP Configuration Commands

Syntax

display ntp-service sessions [ verbose ]

View

Any view

Parameter

verbose: Displays the detailed information about all the sessions maintained by the

NTP service. When you configure this command without the verbose parameter, the

Ethernet switch displays the brief information about all the sessions.

Description

Use the display ntp-service sessions command to display the status of all the

sessions maintained by NTP service provided by the local device.

Caution:

The sessions can be created in all NTP operating modes except the NTP server

mode.

Example

# Display the status of all the sessions maintained by the NTP service.

<3Com> display ntp-service sessions

source reference stra reach poll now offset delay disper

********************************************************************

[12345]1.0.1.11 LOCAL(0) 3 377 64 16 -0.4 0.0 0.9

note: 1 source(master),2 source(peer),3 selected,4 candidate,5 configured