3Com Switch 7750 Series
Command Reference Guide – Routing Protocol Chapter 3 OSPF Configuration Commands
3-19
Field Description
LS REQ: neighbor state low Link state request (LS REQ) packet: asynchronous
neighbor state
LS REQ: empty request Link state request packet: empty request
LS REQ: wrong request Link state request packet: erroneous request
LS UPD: neighbor state low Link state update packet: asynchronous neighbor
state
LS UPD: newer self-generate
LSA Link state update packet: newer LSA generated by
itself
LS UPD: LSA checksum wrong Link state update packet: LSA checksum error
LS UPD:received less recent
LSA Link state update packet: received less recent LSA
LS UPD: unknown LSA type Link state update packet: unknown LSA type
LS UPD: LSA length wrong Link state update packet: LSA length error
OSPF routing: next hop not
exist Next hop of OSPF routing does not exist
DD: MTU option mismatch MTU option of DD packet is mismatched
ROUTETYPE: wrong type
value Route type: the value of the type is wrong
Syntax
display ospf [ process-id ] interface [ interface-type interface-number | verbose ]
View
Any view
Parameter
process-id: OSPF Process ID. If you do not specify a process ID, this command
applies to all current OSPF processes.
interface-type interface-number: Interface type and interface number.
verbose: Specifies to display the detailed information about the specified OSPF
interface.