3Com Switch 7750 Series
Command Reference Guide – SSH Terminal Service Chapter 1 SSH Terminal Service
Configuration Commands
1-12
% Do you really want to remove the public key named 192.168.0.39 ? [Y/N]:y
[3Com]
1.1.12 ssh authentication-type default Syntax
ssh authentication-type default { password | rsa | password-publickey | all }
undo ssh authentication-type default
View
System view
Parameter
password: Specifies the authentication type as password.
rsa: Specifies the authentication type as RSA public key.
password-publickey: Specifies the authentication type as both password and RSA
public key, that is, the user can pass the authentication only if both the password and
RSA public key are correct.
all: Specifies the authentication type as password or RSA public key, that is, the user
can pass the authentication if either the password or RSA public key is correct.
Description
Use the ssh authentication-type default command to specify a default authentication
type for SSH users.After the command is configured, when a SSH user is added, if you
do not use the ssh user authentication-type command to specify an authentication
type for the user, the user needs to pass the default authentication type.
Use the undo ssh authentication-type default command to cancel the default
authentication type, that is, no default authentication type is specified.Then when a
SSH user is added, you must specify an authentication type for the user at the same
time.
By default, no default authentication type is specified.
Related command: ssh user authentication-type.
Example
# Specifies the default authentication type as password.
<3Com>system-view
System View: return to User View with Ctrl+Z.
[3Com] ssh authentication-type default password