3Com Switch 7750 Series
Command Reference Guide – Routing Protocol Chapter 3 OSPF Configuration Commands
3-25
Next hops:
Address Type Refcount Intf Addr Intf Name
---------------------------------------------------------------
202.38.160.1 Direct 3 202.38.160.1 Vlan-interface2
202.38.160.2 Neighbor 1 202.38.160.1 Vlan-interface2
Table 3-9 Description on the fields of the display ospf nexthop command
Field Description
Address Address of next hop
Type Type of next hop
Refcount Reference count of the next hop, namely, number of routes
using the next hop
Intf Addr IP address of the interface to the next hop
Intf Name Interface to the next hop
nexthop Next hop
Syntax
display ospf [ process-id ] peer [ brief | statistics ]
View
Any view
Parameter
process-id: OSPF Process ID, in the range of 1 to 65,535. If you do not specify a
process ID, this command applies to all current OSPF processes.
Description
Use the display ospf peer command to display the information about OSPF peer.
Use the display ospf peer brief command to display the brief information, including
router ID, interface, and state, about every OSPF peer.
Use the display ospf peer statistics command to display the statistics of every
OSPF peer, namely, the number of peers in various states in every area.
Example
# Display the information about OSPF peer.
<3Com> display ospf peer
OSPF Process 1 with Router ID 1.1.1.1