3Com Switch 7750 Series
Command Reference Guide – Multicast Chapter 5 PIM Configuration Commands
5-10
Description
Use the display pim rp-info command to view the RP information of the multicast
group.
In addition, this command can also display the BSR and static RP information.
Example
# View the RP information of the multicast group
<3Com> display pim rp-info
PIM-SM RP-SET information:
BSR is: 4.4.4.6
Group/MaskLen: 224.0.0.0/4
RP 4.4.4.6
Version: 2
Priority: 0
Uptime: 00:39:50
Expires: 00:01:40
Table 5-5 Description on the fields of the display pim rp-info command
Field Description
PIM-SM RP-SET information: Combination of RP information sets
BSR is: 4.4.4.6 BSR is the VLAN interface of 4.4.4.6 in
the network
Group/MaskLen: 224.0.0.0/4
RP 4.4.4.6
Version: 2
Priority: 0
Uptime: 00:39:50
Expires: 00:01:40
The RP whose group address is
224.0.0.0 and mask length is 4 is the
virtual interface of the IP address 4.4.4.6.
The priority of the version 2 RP is 0. It is
up for 39 minutes and 50 seconds and
expires in one minutes and forty seconds
Syntax
pim
undo pim
View
System view