3Com Switch 7750 Series
Command Reference Guide – Port Security & Port Binding Chapter 1 Port Security Commands
1-1
Chapter 1 Port Security Commands 1.1 Port Security Commands
1.1.1 display port-security
Syntax
display port-security [ interface interface-list ]
View
Any view
Parameter
interface-list: Ethernet port list, which can contain multiple Ethernet ports. The
interface-list argument is in the format of { interface-type interface-number [ to
interface-type interface-number ] } & <1-10>, where interface-type represents the port
type, interface-number represents the port number, and & <1-10> means that you can
provide up to 10 port indexes/port index ranges in this argument.
Description
Use the display port-security command to display information about port security
configuration (including global configuration, and configuration on specified or all
ports).
By checking the output of this command, you can verify the current configuration.
Caution:
z This command will display global and all ports' security configuration information if
the interface-list argument is not specified.
z This command will display global and particular port's security configuration
information if the interface-list argument is specified.
Example
# Display global and all ports' security configuration information.
<3Com> display port-security
Equipment port-security is enabled